0

Your Cart is Empty

Vaporesso XROS Pod Kit - Care Version (CRC)

3 items left

The CRC Version of this pod/tank is compatible with all corresponding batteries/mods.

CRC LOGO

XROS is a unique vape that brings you an unparalleled customizable experience. By adopting well-developed MESH pods and an adjustable airflow control system, XROS maximizes the effectiveness of flavour and nicotine satisfaction.

The mighty power of an 800mAh battery is built into the slim body with a classic stainless design. With Type-C fast charge, it only takes 45mins to fully charge. Can be activated by auto-draw or press-to-fire with the dual-firing mechanism.

Specifications:

  • Size: 112 x 13 x 23 mm
  • Battery Capacity: 800 mAh
  • Pod Capacity: 2 mL
  • Power Range: 11W - 16W
  • Output Voltage: 5V
Package Contents:
  • 1x VAPORESSO XROS 0.8ohm POD (2mL) - CRC Version
  • 1x VAPORESSO XROS 1.2ohm POD (2mL) - CRC Version
  • 1x Type-C USB Cable
  • 1x User Manual
  • 1x Warranty Card
  • 1x Reminder Card

Purchase spare pods here 

Filling instructions: 
  1. Remove the black cap, Press the end of your refill bottle down on the silver refill valve opening so the valve opens just a little and start slowly squeezing your bottle to fill the pod cartridge, release once full, wipe off any mess and replace cap.
    1. IMPORTANT!
      1. Do not press down all the way and bottom out the valve or the spring may jam preventing valve from closing afterwards in turn causing the pod to leak. There is no way to unjam the mechanism and the pod will need to be replaced. 
      2. Do not squeeze bottle to hard in an attempt to fill the pod quickly or it will pressurize the pod forcing the liquid through the coil and leaking out the bottom and top creating a mess when filling.
      3. Hold the pod so the filling valve mechanism is at the top allowing the air bubble when filling to escape through the valve as it is being filled.

 

    keep updated