The VAPORESSO XROS MINI POD KIT is the newest member of the XROS Family. It features a diamond pattern surface with a great non-slip feel in the hand with updated rounded corners at the base.
The XROS MINI is more compact yet has a bigger 1000mAh built-in battery with Type-C fast charge port which takes less than 1hr to fully charge.
It is activated only by auto-draw (no buttons) and does not have airflow control as it is designed strictly for a MTL (tight draw) experience. The LED on the front has 3 colors to indicate approximate battery life left.
- Dimensions: 98.9 x 23.4 x 13.5mm
- POD Capacity: 2ml
- Output Wattage: 11W/16W
- Battery: 1000mAh
- Charging: Type-C, 5V/1A
- Carton Size: 350 x 335 x 240mm
- SSS Leak-Resistant Technology
- 1000mAh Long lasting Battery
- Clamshell Top Filling without Mess
- Great non-slip and overall feeling in-hand
- 1A Type-C Fast Charging
- 1 x VAPORESSO XROS MINI Battery
- 1 x VAPORESSO XROS REPLACEMENT POD (CARE VERSION)[CRC]-1.2OHM
- 1x Type-C USB Cable
- 1 x User Manual
- 1 x Warranty Card
Purchase spare pods here
- Remove the black cap, Press the end of your refill bottle down on the silver refill valve opening so the valve opens just a little and start slowly squeezing your bottle to fill the pod cartridge, release once full, wipe off any mess and replace cap.
- Do not press down all the way and bottom out the valve or the spring may jam preventing valve from closing afterwards in turn causing the pod to leak. There is no way to unjam the mechanism and the pod will need to be replaced.
- Do not squeeze bottle to hard in an attempt to fill the pod quickly or it will pressurize the pod forcing the liquid through the coil and leaking out the bottom and top creating a mess when filling.
- Hold the pod so the filling valve mechanism is at the top allowing the air bubble when filling to escape through the valve as it is being filled.